What are you looking for today?

Coffee For Workplace      Coffee For Home      Coffee For Hospitality

Accessories      Buy Syrup     Buy Chai

What are you looking for today?

Coffee For Workplace      Coffee For Home      Coffee For Hospitality

Accessories      Buy Syrup     Buy Chai

What are you looking for today?

Coffee For Workplace      Coffee For Home      Coffee For Hospitality

Accessories      Buy Syrup     Buy Chai

EP Maxi Trouble Shooting

TROUBLE SHOOTING

EP maxi coffee machine trouble shooting pdf file DOWNLOAD PDF FILE

Problem

Possible Causes

Solution

The coffee machine doesn’t turn on.

• Machine not plugged into the electricity source.

• Check it is plugged in correctly.

LEDs flash quickly.

• The machine has broken down.

• Contact customer services or a service centre.

The cartridge load lever will not
return to a central position.

• Used cartridge/drop collection drawer is full.
• Incorrectly inserted cartridge.

• Empty the used coffee capsule  collection drawer.
• Lift the cartridge load lever and correctly insert the cartridge

The pump is noisy.

• The tank needs filling with water.
• Filter inserted incorrectly.

• Refill with fresh drinkable water.
• Check that the Brita® filter is correctly inserted (see instructions supplied with filter)

 

The espresso machine doesn’t dispense any coffee.

• Unsuitable temperature.

• Hot water/ steam option selected.

• Cartridge load lever in raised position.

• Wait until the ideal temperature has been reached.
• Return the hot/steam dispenser button to a central position.

• Lower the cartridge load lever.

Coffee is not hot enough.

• Cups are cold.
• The coffee machine was not at the correct temperature when the coffee dispenser button was pressed.

• Pre-heat the cups using hot water.
• Wait until the machine light remains lit.

The coffee does not come out or comes out in drops.

• Blocked dispensing spout.

• Clean the dispensing spout.

The coffee comes out too quickly, the espresso crema does not form.

• The capsule has already been used.

• Insert a new capsule.

Milk or cappuccino froth doesn’t form.

• Milk unsuitable.
• Milk is not cold enough.

• Steam dispensing spout is clogged.

• Use fresh semi-skimmed milk.
• Use milk at refrigerated temperature.
• Clean the steam dispensing spout with a needle and clean the arm.

 

No hot water or steam
dispensed.

• Clogged steam/hot water arm.


 

• Insufficient water in the tank.
• Filer not inserted correctly.

• Clean the arm. If the problem persists clean the dispenser hole with a thin needle, making sure that it is free of blockages. Then turn on the machine and dispense a small quantity of steam.
• Refill with fresh drinkable water.
• Check that the Brita® filter is correctly inserted (see instructions supplied with filter).

CONTACT US: 1800 800 255