QUICK LINKS:

Lavazza EP Maxi Components

Preparing the Machine

Turning the Machine ON

Filling the Water Tank

Energy Saving

Preparing Coffee

Dispensing Coffee

Removing the Used Pods


   DOWNLOAD PDF FILE (2.2Mb)
 

TURNING ON THE MACHINE

  Position the machine on a flat and stable surface well away from water, flames and sources of heat. Unplug from the electricity mains if plugged in. When on, never cover the machine with tea towels or similar.

1 - To remove the tank lift it and turn slightly. Rinse with clean water & replace.

Using a water filter (optional accessory) improves the quality of the water and increases the life of the machine. Use the AquaAroma Crema Brita® filter for Lavazza. To insert the filter follow the instructions booklet that comes with the accessory. It is advisable not to modify the filter default setting.

2 - Fill the water tank up to the MAX level indicated using only fresh non-sparkling drinkable water.

The water must never go above the MAX indicator line and should always remain above the MIN marking. Only use fresh drinkable, non-sparkling water. Warm water and other liquids may damage the tank. Do not attempt to use the machine if there is no water in the tank. Check that the water level is above the MIN level indicated.

3 - The tank may only be filled via the side opening.

4 - Plug the power cord into the electricity mains and turn on/off switch to the ON position.

5 - Wait until the power light remains lit and the machine emits an acoustic sound.

ENERGY SAVING

1 - After a period of inactivity, the machine will go into stand-by mode and the power light will flash.

2 - To re-start the machine simply lift and lower the cartridge load lever.

3 - The machine is ready for use when it emits an acoustic signal and the power light remains lit.

PREPARING COFFEE OPTIONS
 Regulating the dispensing spout:
Espresso coffee: dispensing spout out, facing down
Large cup of coffee: dispensing spout back, facing up

Regulating the cup-support rack:
Espresso coffee: rack rotate 180 degrees, Large cup: rack down (standard position)

Only Lavazza ESPRESSO POINT MAXI cartridges may be inserted into the cartridge slot.

DISPENSING COFFEE

1 - Position the cup in the centre of the rack.

2 - Lift the cartridge load lever and insert the coffee pod into the slot.

Always use the grip. Do not put your fingers or other objects into the cartridge slot
If the cartridge does not enter, empty the used cartridge/drop collection drawer

PREPARING COFFEE OPTIONS

3 - Press the coffee dispensing button: the light flashes.
4 - When you have the desired quantity of coffee in your cup, press the coffee dispenser button again to stop the machine.

REMOVE USED COFFEE CAPSUALS

1 - Gently unclip the cartridge/drop collection drawer.

2 - Remove the lid and remove the used coffee pods. Place the drawer back into place.